莱恩6 HX效果器外壳模型

Line6 HX Stomp cover

2023-07-27 02:58:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A simple cover for Line6 HX Stomp.

Print Settings

Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.4
Infill:
15
Filament brand:
Generic
Filament color:
transparent
Filament material:
PET-G

Post-Printing

The cover is printed flat but the HX Stomp has a slanted front part. There are small triangular cutaways in the sides to help you bend the print to fit this slanted part - heat them up slightly and bend by approx 11 degrees, you can superglue the sides of the cutaways where they meet.

I printed this in transparent PET-G. Don't use PLA, the unit gets pretty warm in use and the cover may warp up. Resolution doesn't really matter, it's a simple design - I used a 0.8 nozzle and 0.4 layer to improve transparency.

The remaining parts are:

pushbutton and pushbutton housing - you may glue them to the faceplate over the cutout for the <PAGE button, to be able to use your foot to switch the view. You may put a silicone nub (or other soft sticker) at the bottom of the pushbutton to avoid scratching.
knob protectors - you may glue them to the faceplate between the holes for three knobs (print 3 or 4 pieces)
protector bar - you can glue it under the cutout for the <PAGE () PAGE> panel, this should also protect the volume knob.