飞行熊鬼魂5型风扇套件，适用于原装5015风扇

Flying Bear Ghost5 fanduct for original 5015 fan

2023-07-27 03:51:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Cooling the material on the stock Flying Bear Ghost5 printer is critical, so I designed and tested a simple conveyor that directs air directly under the nozzle to solve the problem nicely.

To assemble it, remove the original 5010 fan, place the conveyor on the outlet hole and reassemble the fan in its original position: the fanduct will remain locked in the right position without the need for glue or screws.

The 3mf and gcode files are specific to be printed with Ghost 5. Otherwise, use the stl file.

It is preferable to print it in ABS, ASA or PETG with the lowest possible layer height to avoid turbulence; of course you can also print in PLA, but once mounted I recommend setting the cooling fan to 10% instead of 0% during the first layer of the other prints to to prevent its deformation when using high build plate temperatures combined with a slow first layer speed.