3dsjs

Skadis Tesa 参数化电源条墙挂架(无螺丝)

Skadis Tesa Powerstrips Tape Wall Mount (no screws, parametric)

2023-07-27 03:51:18

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

Attach your Ikea Skadis to walls or furniture without having to drill holes.

You can use Tesa Powerstrips tape or any kind of alternative adhesive tape for the same purpose.

Warning! Please use the appropriate tape and for the appropriate weight, otherwise you risk finding your Skadis & things on the floor!

2 width versions (both 5cm in length):

  • 21mm wide for single tape
  • 42mm wide for double tape.

For other sizes, change the parameters in the F3D file.

The hooks are a tight fit, so they can stay in place when you left the board and install it, also for when you want to add, remove things from the board. However, in the parametric version, you can adjust tolerances!

Printing

Print with supports.

I strongly suggest printing on the side for increased strength of the hook! Also, use a cube modifier with 100% infill for a few layers and the hook.

Installation

  1. Put the Skadis board on the table and place 4 hooks in corners
  2. Attach adhesive tape to the back of the hooks
  3. Lift the Skadis board, carefully align it where you want to install it and press
  4. Apply force in the area of all the hooks, so that the adhesive does its job

Tags

License

CC BY-NC-SA

Skadis Tesa Powerstrips Tape Wall Mount (no screws, parametric)
by capze is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

Skadis Tesa 参数化电源条墙挂架(无螺丝)
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢