格林德里诺胳膊套袜
Grinderino Arm Socks
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I made these super-light arm socks/skids for the Grinderino by scanning an arm and then adding a thin skin to it with a little lip on top to hold it. The motor screws don't hold it. For the 'skull' version I got the skull from a Demibot design by payne_fpv. They're almost too light. Thin... Fit like socks. No motor protection, but should keep your carbon nice. Printer settings need to be tight to come out right, but I like the option if you're saving weight.
Print Settings
- Rafts:No
- Supports:Yes
- Resolution:Fine
- Infill:100%
- Filament brand:
sain Smart
- Filament color:
purple
- Filament material:
TPU
- Notes:
Supports only needed for the skull version. I printed it skull-side up.
Tags
License
Grinderino Arm Socks
by DuneRunner is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
三维打印可全制作转盘2023-03-26 -
AH-KU MkII 侦察/近战机器人2023-03-26 -
步进电机支架（NEMA 16）2023-08-08 -
螺母与螺栓0.6毫米公差测试2024-04-22 -
blink门铃钥匙2024-05-08
最热下载
-
Toyota 22RE发动机扩展套件2023-03-26 -
法兰尺寸测量工具（小）2025-07-16 -
Woods Mower 30922 护盾保持者2024-04-24 -
用于Raspberry Pi高质量摄像头的D型安装适配器2024-05-08
最新模型
-
私密羞羞娱乐骰子2025-07-15 -
9克拉伺服舱机（用于飞翼）2024-05-08 -
Taco Bell国际象棋套装：骑士版本2024-05-08 -
CIS 编织线火花线插头固定装置2024-05-06 -
SD卡与USB设备支架2024-05-06