格林沃克斯雪拆机风扇齿轮部件3D模型

greenworks snowblower chute gear

2024-01-10 22:41:47

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

格林沃克斯雪拆机风扇齿轮部件3D模型

Summary

The 180 degree rotating chute on my greenworks 20" 80v battery operated snowblower broke in the first season. It could be turned from the handle but the gearing was clearly slipping. Four years later I finally took things apart, found that there was one broken tooth in the nylon gearing that was causing all the problems. A bit of time on tinkercad and a few prints later and this is the result. Posted today because I have been actually able to use it a few times this week. So far, so good.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
Yes
Resolution:
0.4mm hot end, 0.2mm layer height
Infill:
25% infill has been ok so far
Filament brand:
flashforge
Filament color:
black
Filament material:
pla
Notes:
linear support on the build plate worked ok. I would probably try organic support (on prusa slicer) if I needed another; finding organic support easier to remove.

Tags

chute Gear greenworks snowblower

格林沃克斯雪拆机风扇齿轮部件3D模型

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型