BIQU H2 V2S 排出器 + 火山型热端（或轻量版）+ BL触摸模块 + ADXL345 加速计安装架（适用于Sidewinder X2 3D 打印机）

Extruder BIQU H2 V2S + Volcano Hotend (or Lite) + BL Touch + ADXL345 Mount for Sidewinder X2

2023-08-03 17:44:51

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

BIQU H2 V2S 排出器 + 火山型热端（或轻量版）+ BL触摸模块 + ADXL345 加速计安装架（适用于Sidewinder X2 3D 打印机）

This text appears to be a step-by-step guide on how to install and configure a 3D printer, specifically the Sidewinder X2 with a BIQU H2 extruder and a volcano nozzle. The guide is written in a conversational tone and includes suggestions for improvement. Here's a breakdown of the content: 1. Introduction: The author mentions that they have a Sidewinder X2 3D printer and are sharing their experience with installing and configuring it. 2. Hardware installation: * Installing the BIQU H2 extruder * Attaching the volcano nozzle to the extruder * Mounting the BLTouch probe * Installing the ADXL345 accelerometer (optional) 3. Software configuration: * Setting up the printer's firmware (Marlin) * Configuring the extruder settings * Adjusting the maximum extrude-only velocity and acceleration 4. Additional tips and suggestions: * The author mentions that they had to adjust the extruder settings due to the large gear backlash on their H2 V2S. * They suggest using a lower maximum extrude-only acceleration value to avoid overloading and noise. 5. Conclusion: The author invites readers to share their own experiences and improvements. The text includes some technical terms and concepts, such as Marlin firmware, BLTouch probe, ADXL345 accelerometer, and gear backlash. However, the language is generally accessible to a non-technical audience. Overall, this guide appears to be a helpful resource for those looking to install and configure their Sidewinder X2 3D printer with a BIQU H2 extruder and volcano nozzle.BIQU H2 V2S 排出器 + 火山型热端（或轻量版）+ BL触摸模块 + ADXL345 加速计安装架（适用于Sidewinder X2 3D 打印机）

朋友，你觉得上面这个模型，属于下面的哪个分类？