鱼骨(FDM 3D打印机细线测试件，0.4mm喷嘴适用)
Fish Bone(FDM 3Dprinter Fine Line Test Part for 0.4mm Nozzle)
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Fine Line Test Part for 0.4mm Nozzle
Overview
This part allows you to test how fine lines are printed when using a 3D printer with a 0.4mm nozzle. The width of the fine lines varies from 0.1mm to 2.0mm with 0.1mm increments. The length of each line is 10mm. You can use this part to adjust the settings of the nozzle, the filament flow, the temperature, and so on.
How to Use
You need to slice this part with a slicer software such as [Cura] or [PrusaSlicer], and then print it with a 3D printer. When printing, please pay attention to the following points.
- Set the layer height to 0.1mm or less.
- Adjust the filament temperature according to the material.
- Change the settings of retraction, coasting, and so on if necessary.
- After printing, check the width, shape, and strength of each line. You can judge whether the nozzle, filament, and slicer settings are appropriate or not by seeing how well the fine lines are printed.
Tags
License
Fish Bone(FDM 3Dprinter Fine Line Test Part for 0.4mm Nozzle)
by umimi is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
热门推荐
-
未识别十字架006A，可嵌入盒（v2）2023-03-26 -
Delta设置校准为Klipper2023-04-23 -
Quad博士的机械蝉2023-05-19 -
乌玛雷克斯 Strike Point 皮卡汀尼固定钩 3D 模型2024-03-26
最热下载
-
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
沙箱建筑模型2024-05-08 -
螺旋锥形手玩具（全新）2024-05-08
最新模型
-
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
育苗盆-连续自动浇水系统（符合欧盟标准的密封水瓶）2025-07-25 -
鞋撑2025-07-17 -
3d打印的男人凉鞋2025-07-17 -
丰满跪姿美熟女2025-07-16