M42接口到A型镜头适配器

M42 to A-Mount (Minolta, Sony) Lens Adapter

2023-08-04 17:44:38

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I wanted to use my M42 lens in my old Minolta 7000 Maxxum (a-mount) and the original model (https://www.thingiverse.com/thing:5414627) was exactly what i needed except the top part was too big for my lens, so i ended up learning how to use Blender, and after 3 print and giving up, i was able to fix some parts of the model, better connect some vertices and i end up getting a good print.

Im still new, so im not sure if the side where the supports are is suppose to look like that, but it doesnt seem to hinder the adapter, i test it and it focus perfectly, only problem was it was really stuck to the bed (i put glue as well) but i enede up nicking a small part, but it still fits well.

Print Settings

Printer brand:
Creality
Printer:
Ender 5
Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Infill:
100
Filament brand:
Polyterra
Filament color:
red
Filament material:
PLA
Notes:
Careful when pulling it out the bed, i ended up nicking one side, but it still work, the support trees are suppose to leave that weird texture tho?