厨房小工具手持式搅拌机固定架

KitchenAid Hand Blender Mount

2023-08-04 19:29:56

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Simple wall mount for KitchenAid's cordless variable speed hand blender KHBBV.

Needs two screws to hold inside cupboard or to wall; use pan or flat heads, never use countersunk heads with plastic. Make sure the screw head does not touch the blender. Designed to keep sharp edges away from the handle to stop it marking.

The contact area on the bed is not massive, so make sure your first layer game is reasonably on point. You may want to add supports inside the screw holes, I don't bother and the result is great. Run a file over the rear mounting surface to remove any bumps. Use a strong material that can cope with the relatively heavy blender and keep it out of direct sunlight.

Check out more designs from Department_Nine.

KitchenAid is a registered trademark of Whirlpool Corporation. Image of stick blender copyright Whirlpool Corporation or its respective owner.