Gopro 会话适配器 - Caddx 花生子弹 / Insta360 Go 2

Gopro Session adapter - Caddx Peanut / Insta360 Go 2

2023-08-04 23:17:55

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Gopro 会话适配器 - Caddx 花生子弹 / Insta360 Go 2

Summary

I have several FPV drones with a Gopro Hero Session 5 adapter already printed and mounted onto my frames. I just bought a Caddx Peanut/Insta360 Go 2 camera and I want to be able to mix and match using the session vs the peanut depending on the flight. Both versions will allow the optional magnetic back to allow charging from your FC.

I have 2 different adapters.
Session Adapter - is an easy to slide in from the side of the adapter for quick swaps, no outer protection. The file I modified has some pre-build supports that can break away easily. You'll need to add your own supports for the rest. Its rotated and mounted with the pre-builts ready to go.

Session Adapter V2 - more of a snug fit, requires the Caddx camera to be installed from the back and sits firmly in the adapter. It also has outside protection. I also added a small slot to add a zip tie/velcro strap to secure the GoPro adapter into an existing Gopro case just in case a bad crash happens to prevent the entire thing from getting sent away. You'll definitely need to print this in TPU to stretch around the camera.