滚筒适用于小型Belt Sander
Rollers for mini Beltsander
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Simple rollers with spacers I made using freecad.
I didn't like how much noise and friction was generated by the ball bearings so I made something to fix that.
if the bearings start to snag while you are tightening you can just install a leftover washer between the spacer and bearing, the roller should move with very little resistance once it is installed.
you can print it with PLA, but be mindful of the temperature, if you expect heavy use you should print it with PETG or nylon.
the tensioning spring my rub against one roller, you can remove the spring and just tighten the screw or only install one roller.
Print Settings
- Printer brand:
Renkforce
- Printer:
Renkforce Basic 3
- Rafts:Doesn't Matter
- Supports:Yes
- Resolution:0.2
- Infill:50
- Notes:
if you print with 1.2mm wall thickness the infill doesn't matter because it will all be printed solid
Tags
License
Rollers for mini Beltsander
by CrankyDoodle is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
WALL-E机器人 - 全部3D打印2023-03-26 -
Wolf Mask ('adult') - 无支撑2023-03-26 -
长犬2024-04-23 -
无人机撞击探测器开关2024-05-03 -
用于Raspberry Pi高质量摄像头的D型安装适配器2024-05-08
最热下载
-
简单乳房生成器 OpenSCAD 娃娃模型2025-07-15 -
苹果 HomePod mini壁挂装饰2024-03-19 -
免费蜘蛛侠头像STL模型，适合3D打印2024-03-24 -
Enders 3版控制面板2024-05-08
最新模型
-
女式凉鞋2025-07-16 -
JK剧集BMS屏幕支架设计2024-05-08 -
9克拉伺服舱机（用于飞翼）2024-05-08 -
地莓双层展示架（宜家温室系列）2024-05-06 -
1:400机场终端模型2024-05-06