参数化油滤器扳手

Parametric oil filter wrench

2023-08-05 01:18:24

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I needed an oil filter wrench for a Mahle OC619 oil filter for a BMW motorcycle. Couldn't find any that fit, so I designed my own, and I am also uploading the OpenSCAD file so that you can change it for a perfect fit, whatever filter you have!

Expect to have to tweak parameters because each printer is a bit different and you will want to have a tight fit, but not so tight that you can insert it.

It ended up not working for me because my oil filter was /extremely/ tight and the thin metal of the filter stripped (not the fault of the wrench), and I had to use a Lisle 63600 wrench (which I highly recommend for these situations), but if your filter is not stupidly tight, go ahead and use this, it will work! Just a reminder to not overtighten your filters and to always oil the gasket before fitting a new one.

I recommend PETG, 100% infil, although PLA has chances to work fine if your filter is not completely overtightened.