Ryobi 4V USB电池容器（可配置）

Ryobi 4V USB Battery holder (configurable)

2023-08-05 09:44:07

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

We recently purchased two of Ryobi's tools that take the 4V USB chargeable batteries. So, yet another battery form factor to store. I put this together in OpenSCAD and it is configurable as to the number of batteries it can store and how it can be mounted to a wall. There is an opening left at the bottom so a USB cable can be plugged in to charge the batteries while they are in the holder.

You can have anywhere from 2 batteries to however big your 3D printer allows. For wall mounting you can have a top mounting tab, side mounting tabs or screw keyholes in the back.

Currently we have two batteries, so I'm using a 4 place holder, but I expect that to grow and I'll have to print a bigger holder.

PS The charger I'm using is from Amazon: https://www.amazon.com/dp/B091YP7NHD and I have a 3D model for a wall mount for that and can post it if anyone is interested.

Print Settings

Printer brand:
Snapmaker
Printer:
Snapmaker 2 A350
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Notes:
Since printers vary, there is a configurable parameter as to how much space to leave around the battery. The default works well for both of my printers using both PLA and PETG.