MNTD型管道盖 - 无帽状态

MNTD Duct Lid - Removed Hat

2023-08-05 15:32:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Do you need it?
No.

Do you want it?
Yes.

See pictures for 10c improvement between with and without the Duct Lid. Both of which are perfectly safe temps. While t he "puck" is friction fit, the vents will need to be glued in. Make sure the arms that stick out from the corners are faced down towards the print bed when you slice the files.

There are 3 versions of this lid. All of which are made for the MNTD case. Make sure you use ASA or ABS to prevent the lid from melting.

Duct Lid:
This lid is made for when the hat is removed and this heatsink is installed. This lid has a duct to ensure cool air intake over the heatsink. The lid also has exhaust vents to direct exhaust away from the intake.

Ductless Lid:
This is the exact same lid as above but without a duct.

Ductless Lid AG:
This lid is an air grate. It also has no duct.

Feel free to leave a tip if you want, but you don't have to. Any BNB/MATIC token:
0xd0Ede4124F140A6ee04b70c9D9005972bbC70afa