Skywalker X8 VTOL型号四旋翼转换

Skywalker X8 VTOL Quadplane Conversion

2023-08-05 20:14:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These are the parts for doing a VTOL/quadplane conversion of a Skywalker X8 flying wing RC plane. My plane is running Ardupilot.

Full details are available in this YouTube video: https://youtu.be/TJx1Zkko_Ug

The arms for the quad motors are 10mmx10mm carbon fibre.

There are two versions of the slide on motor mounts, you will want two of each version. They should be selected so that all motors tilt slightly inwards toward the fuselage, assuming you have configured the copter as an H-frame. If you have selected an X-frame then the motors should tilt outwards. This tilt increases the yaw authority. The motor mount should be printed from something like nylon or ABS which have higher melting points (since motors can get hot).

For my build I actually used these tilt-motor mounts for the front two motors, but you could equally just add a fifth pusher motor to the X8: https://www.thingiverse.com/thing:6173506

All parts are designed to be printed without supports.

All fasteners should be M3 bolts, various lengths are used, with nylock nuts.

FYI the extra vertical stabilisers on mine are downscaled versions of this: https://www.thingiverse.com/thing:450060 I opted to include them following a lot of reading about the M2-F2 for a previous lifting body project!