Pimax Crystal壁挂式HMD和控制器

Pimax Crystal Wallmounts (HMD and Controller)

2023-08-05 20:27:54

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Hello, I upgraded from my Oculus Quest to the new Pimax Crystal and did not find any holders or wallmounts yet on Thingiverse. So I just made one myself which is super easy to print.

1) The HMD-mount comes with two screw holes which should be anchored into the wall with plugs. I printed it with black PLA. The HMD holder is incredibly sturdy and can easily support the weight of the Pimax Crystal. There is no flexing and I do not believe that anything can ever break here, even with PLA. The glass lenses do not rest on the holder. The depth of the holder is perfectly matched if you use the larger "Comfort-Pad" of the Crystal. The headset then rests on the pad at the top and bottom, with enough clearance to the glass lenses.

2) The controller mounts come with a screw hole, which should also be fixed with a plug. Once tightened with the screw, the mounts are also bomb-proof. The relatively bulky Pimax controllers fit neatly in here and cannot fall out and are easy to insert and remove. The front is adorned with a Pimax logo. I printed the controller mounts using ABS.

I used a 0.4mm nozzle and 0.2mm layer thickness, as well as a 0.6mm line thickness. Nothing more is needed. It was primarily important to me that the parts are stable and that the expensive hardware cannot fall off and that is definitely given with this print.

Enjoy printing.
Best regards

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO Neptune 2
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Notes:
Easy to print, no supports needed. Just print it in the correct orientation.