Rode专业采访语音麦克风精美3D模型旗帜
Rode Interview GO Microphone Flag
2023-08-05 21:08:16
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
This is a quick design I did for the Rode Interview Go microphone that works with Wireless GO II microphones. This quick and easy print gives you a three sided triangle perfect for applying your decal, or a printed plaque.
Simply slide it over the base and use a rubber o-ring underneath to secure for a clean and professional finish, or you could simpy wrap a few turns of electrical tape over the stem for a quick and easy job.
Print Settings
- Printer:
Bambu Labs X1C
- Rafts:No
- Supports:No
- Resolution:.2
- Infill:15%
- Filament brand:
Generic
- Filament material:
PLA
Post-Printing

Tags
License
CC BY
Rode Interview GO Microphone Flag
by soundmediagroup is licensed under the Creative Commons - Attribution license.
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
最新模型
-
P-Touch胶带架2024-05-08
-
Casio SK-2100麦克风外壳2024-05-08
-
卡塔琳娜22型船模桅杆门2024-05-08
-
法基尔2024-05-06
-
雨滴罩密封夹具套装(针对Scirocco MK1)2024-05-06
最热下载
-
Falcon 9三维模型2023-03-26
-
ZTE MU5001 上位电容器2024-01-10
-
奥迪奥技术卡 ATH-M40x 连轴器2024-03-23
-
空客操纵杆配备控制杆固定装置2024-03-30