Enders 3 S1 Pro型打印机滚筒平稳支架，无需额外部件。

Ender 3 S1 Pro Spool Smooth holder - No additional part

2023-08-05 22:42:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I had a hard time finding a smooth spool holder that wouldn't require any additional part like screw and nuts, so I designed one. It's designed to incorporate into the original spool holder from the Creality Ender 3 S1 Pro (i don't know if any other creality model as the same spool holder (probably))

Included in the files are the nut and screw, a thread test to know if you have to adjust your printers settings before going all in, and an optionnal spacer to place after the bearing if your print came out too long and doesn't roll freely.

Honestly this doesn't do anything, I dont think there is a single benefit to it other than telling people you have a smooth spool holder and that we love to mod our printers amarite.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1 Pro
Rafts:
No
Supports:
Yes
Resolution:
.2mm
Infill:
20% Cubic subdivision
Filament brand:
Not relevant
Filament color:
Grey
Filament material:
PLA
Notes:
I used tree support that added quite a long time to the print because i didn't know if the threads needed support and didn't want to risk it so if you don't want to print support tell me how it goes.