X型连接器猪尾标记

X-connect pigtail marker

2023-08-26 07:09:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I designed these numbered clips for X-connect pigtails to make it easy to keep track of wire runs.
Very simple to print and a SNAP to install to the end of a x-connect pigtail.
I have loaded the numbers in sets of 12.
The "pigtail_requested.stl" file is a file with markers I used for my layout.
I have DC power run out to relay boards so I have a "DC" marker for that wire.
I have AC power run out to AC inflatables so I have a "AC" marker for that wire.
I have DATA going from the KULP to remote receivers so I use the "D" marker for that.

If you have a special request send me a message and I will create a marker and add it to the "pigtail_requested.stl" file. There is no charge.

Print Settings

Printer brand:
Creality
Printer:
CR-6 SE
Rafts:
No
Supports:
No
Resolution:
0.2000
Infill:
30
Filament brand:
OVERTURE
Filament color:
White
Filament material:
PETG
Notes:
These clip to the x-connect pigtail and make it easy to keep track of cable runs.
I use 30% cooling for more letter detail.