UL-野营椅（280克）

UL-Camping Chair (280g)

2024-05-06 03:00:23

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Ultralight DIY Camping Chair - 280 grams!

This is an ultralight camping chair. The tube ends (upper and lower) are 3D-printed with PETG und seem quite robust.

The design idea is to use also a cord connection for the lower tube ends: thus forces on the rods are much lower and now central joint is necessary. This allows to use light weight aluminium tarp poles. The cords should also prevent the chair from sinking into soft/wet ground.

The tubes/rods are 16 mm aluminium tarp poles from amazon. As lower and upper diameter are (here) different, I designed the parts in FreeCAD using a spreadsheet for the dimensions. So you can also download the Freecad-File and adjust parameters to your needs.

To keep the tubes together I use a small piece of bicycle air chamber (4 cm folded). As there is no force on the central joint this works quite well.

The seat is sawn using 200 g/m2 fabric (and there is plenty of room for optimizations :-).

Later on I intend to make a youtube-video on this design.

The total weight is ca. 280 grams, which is lower than any ultralight chair you can buy for money :-)

enjoy!