旋盖圆形胶囊容器
Screw Top Container - Round Puck
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Screw Top Container. This is made to print the top piece at 102 percent. The model was designed so the round outside will match diameter when the top is printed at 102 percent. The male threaded base piece should be printed at 100 percent.
Thread is 3in x 8 tpi for anyone who wondered.
Modeled in Autodesk Fusion 360. Threads are very easy to model in Fusion 360 when the size is included in the program.
I had the vague idea that a can of dip tobacco would fit in here? I don't actually use the stuff, but a friend wanted to try to make something like this, and I wanted to see if threads would print on my old printer.
Do whatever you like with this model, just include the link to my page here when you do.
Print Settings
- Printer brand:
Printrbot
- Printer:
Simple White
- Supports:No
- Notes:
Make sure you print the lid at 102% scale in Cura.
Tags
License
Screw Top Container - Round Puck
by phrogg111 is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
丰田Corolla AE86座椅倾斜手柄2023-05-12 -
星球大战3D棋盘模型：MrBaddeleys国际象棋棋子50%比例展示2023-08-24 -
多面体罗姆博十二面体2024-04-07 -
用于RRD通用型70182电机的mayrc maytech桅杆夹2024-04-20 -
Cateye自行车后视镜修复2024-04-21
最热下载
-
开源 1:10 四驱竞技型 RC 车2025-07-08 -
远投笼2024-04-06 -
吸血鬼领主（免费D&D小模型）2025-07-15 -
泰坦电视核心升级，升级版泰坦巨人核心2025-07-16
最新模型
-
ASG CZ 75 D 双方匣子保护罩2024-05-08 -
Oral-B双齿夹持器3D模型2024-05-06 -
SkiErg表盘固定架2024-05-06 -
鲸鱼玻璃钥匙扣2024-05-06 -
无线电删除板2024-05-06