健康剖分 (HR) 药胶囊填充剂

Healthy Rips (HR) Dosing Capsule Filler

2024-04-28 15:57:03

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Hey!

This is a Dosing Capsule Filler made for the Healthy Rips Rogue Capsules

The Dosing Capsule Filler fits 4 capsules inside. Take the top off, put the empty capsules in and then put the top on. This makes it easier to fill them all up quickly.

The top is made to be snug. For my printer, the .10 offset option fit perfectly with very minor sanding with 800 grit to get it to slide off perfectly. You may need to experiment depending on your printers calibration.

Future plans:

Make a version for the smaller capsules (Fury Edge Capsules)
Make a version for the S&B Mighty Capsules

Versions:

V1 First upload (27-April-2024)

Print Instructions:

Bottom

Print on its base. (Capsule slots facing up)
No supports
I printed at .2 but you can change to any quality you want.
4 Walls
Infill 20% (again, do as you wish... Less may be fine)

Top

You only need 1 Top. Select the one depending on your printers calibration. higher the number (offset) the looser it will fit. I was able to use the 010 offset just fine.
I printed at .2 but you can change to any quality you want.
4 Walls
Infill 20% (again, do as you wish... Less may be fine)

Post Processing: You might need to sand the edges of the top so that it comes out of the bottom without much force. It should be snug enough to hold itself but easy to take off so you don't spill anything. You can print a higher offset (ex: .0.20 version) to ensure it's easy to pull off.