每日药丸胶囊模型

The capsule has 4 compartments that are easy to fill and empty by turning the different rings. The rings lock in place when closed.

The symbols used:

If you have to take pill(s) four times a day, use as shown in the photo.

If you only have to take pills at 2 times, you can provide the capsule with 2 sets of rings and thus create a twice-daily capsule. With 1 moment a day, print 4 applicable rings and you have a capsule to last for 4 days.

Use tree support for all parts. I printed with 0.4 nozzle and 0.2 layerheight.

Use 2 colors. If you want to print everything on 1 bed with color change(s), print both high parts last and place the last one behind the other. In this way, all parts can be printed with 1 plate.

In case you need many or very big pills: the capsule can be scaled up to about 125% without endangering the correct functioning of the locking mechanism. Above that, it may be needed to scale the rings slightly smaller in diameter (not height).

First place the 4 rings on the 2 parts. Ensure they are arranged and positioned the right way!

Now glue both parts together with some Superglue or other good blue. The square shape makes positioning easy.

The capsule is for storing pills and not intended for ingestion!

The capsule has 4 compartments that are easy to fill and empty by turning the different rings. The rings lock in place when closed.

The symbols used:

If you have to take pill(s) four times a day, use as shown in the photo.

If you only have to take pills at 2 times, you can provide the capsule with 2 sets of rings and thus create a twice-daily capsule. With 1 moment a day, print 4 applicable rings and you have a capsule to last for 4 days.

Use tree support for all parts. I printed with 0.4 nozzle and 0.2 layerheight.

Use 2 colors. If you want to print everything on 1 bed with color change(s), print both high parts last and place the last one behind the other. In this way, all parts can be printed with 1 plate.

In case you need many or very big pills: the capsule can be scaled up to about 125% without endangering the correct functioning of the locking mechanism. Above that, it may be needed to scale the rings slightly smaller in diameter (not height).

First place the 4 rings on the 2 parts. Ensure they are arranged and positioned the right way!

Now glue both parts together with some Superglue or other good glue. The square shape makes positioning easy.

The capsule is for storing pills and not intended for ingestion!

The capsule has 4 compartments that are easy to fill and empty by turning the different rings. The rings lock in place when closed.

The symbols used:

If you have to take pill(s) four times a day, use as shown in the photo.

If you only have to take pills at 2 times, you can provide the capsule with 2 sets of rings and thus create a twice-daily capsule. With 1 moment a day, print 4 applicable rings and you have a capsule to last for 4 days.

Use tree support for all parts. I printed with 0.4 nozzle and 0.2 layerheight.

Use 2 colors. If you want to print everything on 1 bed with color change(s), print both high parts last and place the last one behind the other. In this way, all parts can be printed with 1 plate.

In case you need many or very big pills: the capsule can be scaled up to about 125% without endangering the correct functioning of the locking mechanism. Above that, it may be needed to scale the rings slightly smaller in diameter (not height).

First place the 4 rings on the 2 parts. Ensure they are arranged and positioned the right way!

Now glue both parts together with some Superglue or other good blue. The square shape makes positioning easy.

The capsule is for storing pills and not intended for ingestion!

The capsule has 4 compartments that are easy to fill and empty by turning the different rings. The rings lock in place when closed.

The symbols used:

If you have to take pill(s) four times a day, use as shown in the photo.

If you only have to take pills at 2 times, you can provide the capsule with 2 sets of rings and thus create a twice-daily capsule. With 1 moment a day, print 4 applicable rings and you have a capsule to last for 4 days.

Use tree support for all parts. I printed with 0.4 nozzle and 0.2 layerheight.

Use 2 colors. If you want to print everything on 1 bed with color change(s), print both high parts last and place the last one behind the other. In this way, all parts can be printed with 1 plate.

In case you need many or very big pills: the capsule can be scaled up to about 125% without endangering the correct functioning of the locking mechanism. Above that, it may be needed to scale the rings slightly smaller in diameter (not height).

First place the 4 rings on the 2 parts. Ensure they are arranged and positioned the right way!

Now glue both parts together with some Superglue or other good blue. The square shape makes positioning easy.

The capsule is for storing pills and not intended for ingestion!

The capsule has 4 compartments that are easy to fill and empty by turning the different rings. The rings lock in place when closed.

The symbols used:

If you have to take pill(s) four times a day, use as shown in the photo.

If you only have to take pills at 2 times, you can provide the capsule with 2 sets of rings and thus create a twice-daily capsule. With 1 moment a day, print 4 applicable rings and you have a capsule to last for 4 days.

Use tree support for all parts. I printed with 0.4 nozzle and 0.2 layerheight.

Use 2 colors. If you want to print everything on 1 bed with color change(s), print both high parts last and place the last one behind the other. In this way, all parts can be printed with 1 plate.

In case you need many or very big pills: the capsule can be scaled up to about 125% without endangering the correct functioning of the locking mechanism. Above that, it may be needed to scale the rings slightly smaller in diameter (not height).

First place the 4 rings on the 2 parts. Ensure they are arranged and positioned the right way!

Now glue both parts together with some Superglue or other good blue. The square shape makes positioning easy.

The capsule is for storing pills and not intended for ingestion!

The capsule has 4 compartments that are easy to fill and empty by turning the different rings. The rings lock in place when closed.

The symbols used:

If you have to take pill(s) four times a day, use as shown in the photo.

If you only have to take pills at 2 times, you can provide the capsule with 2 sets of rings and thus create a twice-daily capsule. With 1 moment a day, print 4 applicable rings and you have a capsule to last for 4 days.

Use tree support for all parts. I printed with 0.4 nozzle and 0.2 layerheight.

Use 2 colors. If you want to print everything on 1 bed with color change(s), print both high parts last and place the last one behind the other. In this way, all parts can be printed with 1 plate.

In case you need many or very big pills: the capsule can be scaled up to about 125% without endangering the correct functioning of the locking mechanism. Above that, it may be needed to scale the rings slightly smaller in diameter (not height).

First place the 4 rings on the 2 parts. Ensure they are arranged and positioned the right way!

Now glue both parts together with some Superglue or other good blue. The square shape makes positioning easy.

The capsule is for storing pills and not intended for ingestion!

The capsule has 4 compartments that are easy to fill and empty by turning the different rings. The rings lock in place when closed.

The symbols used:

If you have to take pill(s) four times a day, use as shown in the photo.

If you only have to take pills at 2 times, you can provide the capsule with 2 sets of rings and thus create a twice-daily capsule. With 1 moment a day, print 4 applicable rings and you have a capsule to last for 4 days.

Use tree support for all parts. I printed with 0.4 nozzle and 0.2 layerheight.

Use 2 colors. If you want to print everything on 1 bed with color change(s), print both high parts last and place the last one behind the other. In this way, all parts can be printed with 1 plate.

In case you need many or very big pills: the capsule can be scaled up to about 125% without endangering the correct functioning of the locking mechanism. Above that, it may be needed to scale the rings slightly smaller in diameter (not height).

First place the 4 rings on the 2 parts. Ensure they are arranged and positioned the right way!

Now glue both parts together with some Superglue or other good blue. The square shape makes positioning easy.

The capsule is for storing pills and not intended for ingestion!

The capsule has 4 compartments that are easy to fill and empty by turning the different rings. The rings lock in place when closed.

The symbols used:

If you have to take pill(s) four times a day, use as shown in the photo.

If you only have to take pills at 2 times, you can provide the capsule with 2 sets of rings and thus create a twice-daily capsule. With 1 moment a day, print 4 applicable rings and you have a capsule to last for 4 days.

Use tree support for all parts. I printed with 0.4 nozzle and 0.2 layerheight.

Use 2 colors. If you want to print everything on 1 bed with color change(s), print both high parts last and place the last one behind the other. In this way, all parts can be printed with 1 plate.

In case you need many or very big pills: the capsule can be scaled up to about 125% without endangering the correct functioning of the locking mechanism. Above that, it may be needed to scale the rings slightly smaller in diameter (not height).

First place the 4 rings on the 2 parts. Ensure they are arranged and positioned the right way!

Now glue both parts together with some Superglue or other good blue. The square shape makes positioning easy.

The capsule is for storing pills and not intended for ingestion!