Geeetech A10 触屏及Raspberry Pi夹持器

Geeetech A10 - Holder for Touchscreen and Raspberry Pi (Klipperscreen)

2023-08-05 22:56:10

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Together with the "Case for 5inch Waveshare DSI Touchscreen" https://www.thingiverse.com/thing:6153863 this is an additional holder for a Raspberry Pi (2/3/4) The Raspi is mounted on a tray and can easily be removed from the holder without any tools.

Mount the Raspi with four 20mm standoffs (M3 or M2.5) on the PiTray. Mount the PiCover (Raspi 2+3-> PiCover.stl, Raspi 4-> Pi4Cover.stl) with four M3x5 mm screws and washers Connect the ribbon cable from the LCD to the raspi and slide the tray into the holder. Push the latch into the two holes to fix the tray onto the holder.

I have drilled out the holes on the Raspi to fit M3 because I use M3 standoffs.

Edit: Added a cover for the Raspi 4. It's based on a CAD Model of a Raspi 4, not on an actual Raspi 4. So I'm not sure if it is 100% accurate.

Additional parts needed:
4x M4x12 Socket Head Bolt
6x M4 Washer
4x M4 T-Nut
2x M4x10 socket head bolt
4x M3x5 mm Socket Head Bolt
4x M3 Washer
4x 20mm Standoff for Raspberry Pi Tray
2x M4x6x6 Heat Set Inserts
1x 15-20 cm long 15 Pin DSI Cable to connect the Pi With the Screen