Satsana 5015 适用于 Geeetech Mizar 系列 3D 打印机（Mizar S, Pro, Max）

Satsana 5015 for Geeetech Mizar Series 3D Printers (Mizar S, Pro, Max)

2024-04-03 02:03:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Satsana 5015 适用于 Geeetech Mizar 系列 3D 打印机（Mizar S, Pro, Max）

Summary

This is a re-work of my own re-work of the Satsana blower duct and hotend housing for the Mizar S.

Features:

Minimal extra hardware required (2x 20mm M4 bolts + nuts for the blower) - otherwise only requires original screws from stock components.
Prints either as 1 whole part, or as 2 main pieces to allow for re-printing and modifying parts without having to re-print the entire thing or for doing the duct and shroud in different materials or colors.
Duct (bottom part) can be printed standing-up support-less if you make the top and bottom separately. (I made mine with PETG, bridging was totally fine.)
Supports 5015 radial blower fans for high throughput
Comes with a printable guidepost that snaps onto 2 places to help you align the two halves before adhesion
Good clean geometry makes for easy modifications

Note:

You will need to either bend, remove, or re-locate the LED on the bottom of the hotend circuit board for the duct to clear the light. I personally chose to desolder mine and re-locate it on the opposite side for minimal effort which allowed me to bend it a bit further so the duct fits.