SATSANA 5015 4020/10 CRT ENDER 3/V2+ BY HECBEN

2024-03-25 13:27:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

SATSANA 5015 4020/10 CRT ENDER 3/V2+ BY HECBEN

Summary

This is the remix of the remix of the remix of the remix… of the original SATSANA. It is designed for mounting a 4020/4010 heatsink and 5015 layer fan. The remixes I based this on had design flaws that prevented a reliable fixation of the 5015, so I added an edge to the air inlet to match the fan’s outlet for better airflow. On the other hand, the printed mounts for the CR Touch probe (original) in other remixes were not very reliable in terms of position/angle and also required additional nuts, so I adapted the SATSANA design to integrate with the original probe mount, using the screws to secure both the SATSANA and the probe mount at the same time. The necessary screws are the same. Finally, I added some tabs to be able to place covers on the heatsink part, I will soon update this post to add some design. It does not interfere with the operation, it is aesthetic (although it also prevents touching the blades).

Followme and watch
https://cults3d.com/es/usuarios/hecben/modelos-3d

Print Settings

Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Filament brand:
Ender
Filament material:
PLA, PETG
Notes:
The resolution, infill, and supports are at your discretion.
supports only for the sensor mount area and the heatsink part. Active interface and low density.