紧身弹匣型 ASG 蝎子 Evo 枪套

Slim ASG Scorpion Evo Magazine Holster

2023-08-06 02:05:27

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Non-interlocking holster for ASG Scorpion Evo 3 magazines. In this remix the magazine is oriented so that it curves away from the MOLLE clip, and can fit 1 mag per MOLLE loop on many belts.
The MOLLE clip requires a metal attachment/hinge part. The original design recommended an M3 screw and lock nut, but I consider that overkill and have had success with both 16 gauge finishing nails bent on the ends and with doubled-up galvanized bailing wire (used in the photos).

Print with supports enabled to support the MOLLE clip features. I recommend a high wall thickness, and I have had successfully field tested holsters printed at .2 resolution with a wall count of 5.

This is a remix of a wider, lower profile interlocking version by @alexh03

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
40%
Filament brand:
Fremover
Filament color:
Black
Filament material:
PLA
Notes:
Recommend printing with a higher wall count. I have had success with a wall count of 5.