3dsjs

美达瑞/美达锐/威龙盾 5.56毫米/300格洛克 弹匣井 flair

MDR/MDRx/WLVRN 5.56/300BLK Magwell Flair

2024-04-29 12:55:08

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

This is a MDR/MDRx/WLVRN flared magwell. It is a 2 part Assembly that clamps on either side.

If you need it to clamp with greater force, place electrical tape on the lips that grab onto the magwell.

Parts List:
1x Print Assembly A
1x Print Assembly B
1x M3x18 Fastener
1x M3x50mm Fastener
2x M3 Nut

Images
https://imgur.com/a/FyQ2qnO

Print Settings

  • Printer brand:

    Anet

  • Printer:

    A8

  • Rafts:
    No
  • Supports:
    Yes
  • Resolution:
    .3
  • Infill:
    15%
  • Filament brand:

    Any

  • Filament color:

    Any

  • Filament material:

    PETG/PLA/Nylon

  • Notes:

    You may need to sand/finish the components exposed to the support.

Tags

美达瑞/美达锐/威龙盾 5.56毫米/300格洛克 弹匣井 flair
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15