Fifine AM8冲击挂钩

Fifine AM8 Shock Mount

2024-03-26 12:21:39

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The Fifine AM8 sounds amazing (for the $$) but the handling noise transmitted into the mic is HORRIBLE! This mount pretty much eliminates noises that typically come through the mic stand.

PLEASE read the notes below, describing how to print each of the 3 components.

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20-100% (see notes)
Filament brand:
Overture
Filament color:
matte black
Filament material:
PLA
Notes:
Outer Ring:
no supports needed
wall count: 5
top/bottom count: 5
infill 20-100% (I used 100%)

Inner Ring:
supports needed
wall count: 5
top/bottom count: 5
infill 100%

Thread Mount:
threaded for a 5/8" mic mount (suggest using insert adapters listed below)
wall count: 5
top/bottom count: 5
infill 20%

Parts:
5/8" to 3/8" mic adapter (will survive threading & unthreading more than the printed threads)
4mm black hair elastics (I used Scunci brand and the I.D. was about 44mm and as small as I'd recommend)
(2x) M4 x 8mm allenhead bolts to mount mic to inner ring
(2x) M4 x 12mm allenhead bolts to mount thread mount to outer ring
(2x) M4 nuts to mount thread mount to outer ring