KCEVE双显示端口KVM桌下安装支架

Under desk mount for KCEVE Dual Display port KVM

2023-08-06 02:45:30

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a mounting bracket for the popular KCEVE dual display port KVM found on Aliexpress and Amazon. The mounting holes have been countersunk to keep your screw flush and I'll be using #6 Spax screws to mount mine to my desk. It is a hair shorter than the height of the KVM with the rubber pads on the KVM in order to keep it from rattling in the mount once it has been installed.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1
Rafts:
No
Supports:
Yes
Resolution:
.16mm
Infill:
15%
Notes:
You will likely want to flip this upside down to print. It will produce less waste from supports that way. Layer height is not crucial, I just do most final prints at .16mm