可折叠5加仑水瓶配件

Replacement parts for water cube collapsible 5 gallon container

2023-08-06 03:25:46

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These are replacement parts for a 5 gallon collapsible water storage cube. These cubes are great for camping, but the valve parts break easily or get lost.

There are 4 parts:

Valve Handle A:

Direct replacement for the original valve handle, assuming the valve base is not broken.

Valve Nut:

Direct replacement for the original threaded part that attaches the valve to the container. Can also be used with the below 'B' valve.

Valve Handle B & Valve Base B:

if your original valve plug is broken/lost you will need to print both of these parts, which are a different design from the original. The original valve base design is not conducive to 3D printing, it would never seal properly.

General Notes:

Tolerances are tight the surfaces that rotate against eachother for the valve seal, may require some adjustment on your printer. I recommend adjusting the valve handle with horizontal expansion until it fits the base properly. Also recommend using a dab of silicone grease or petroleum jelly to lubricate and help it seal better.