极简可逆握子套装

Minimalistic Reversible Grip Set

2023-08-06 04:59:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A set of minimalistic and reversible grip set. Designed around the Longshot XLS but works on other blasters.

Step files will be available via Etsy once the shop is setup.

Special thanks to @RedCowl for encouragement and testing and advice/help as this is my first scratch design in CAD.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
Doesn't Matter
Supports:
Yes
Infill:
20

Post-Printing

Take a fine grit sandpaper to the spheres that add texture. You should need more than 5-10 seconds of sanding but it will make them smoother and much more comfortable.

How I Designed This

These grips were designed to not protrude out of the sides or front of the XLS. They all can use the provided printed roller using either a m3 screw and nut, the printed rod, a dowel secured by m3 screws or a strip of filament secured by m3 screws.

They are also reversible if your prefer the griping segment in front but this will negate the roller. Okay it will technically negate the roller however it MAY still fit it just likely wont, you know, roll.