简约、快速且极简设计的年轻植物花盆（瓦瑟模式适用）

Simple, Fast and minimalistic Plant Pot for your young plants! (Vasemode ready)

2024-04-28 22:43:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Hoi :) I forgot to buy some pots for my seedlings so I loaded up some old filament and printed a bunch of these :)

Idea:

Fast 2 print, simple big pots with very few material necessary.
BasePlate to push out the rooted soil when repotting.
Coaster if you need to place the pots indoor or want to have a little water reservoir at the bottom.

2 Versions: Airy & Standard (Vasemode ready)

Assembly: Put the BottomPlate in before you add the earth!

Scaling:

You can scale the Pots up / down in your slicer. I scaled all parts to 8%. If you sacle it very low the airy version could make trouble! Also I would not recommend to scale the baseplate in Z direction since it is quite thin already.

Printing Instructions:

Use Arachne Perimeter Generator and Vasemode (not for the airy Version).

I used a ,4 mm Nozzle & ,2 mm layer height.

Vasemode: If you want a stronger part choose a high temperature and increase the extrusionwidth! (I use ,65 mm with a ,4 mm Nozzle)

Tipp: You can print several of the pots in vasemode “at once” if you turn “Sequential print” on! (make sure that no collision will happen! → Check your printing order of the parts!)

Material:

I printed my pots in PLA. But If they are quite thin and heat up during the day maybe PETG or ABS is better! (If the earth is quite wet that will cool the pot!)

Have fun!

You can also print my water Jugs to water em properly ,-)

https://www.printables.com/model/856972-universal-jug-pot-can-vasemode-waterproof-fast-pri