彩弹坦克插头

Paintball tank plug

2023-08-06 06:34:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This threaded plug will fit in paintball airtanks when their regulator is removed.
The first design is for taking your tanks to get hydro'd or generally using as handle.

The V2 is for placing in a tank that you've sold so you can ship in confidence and know nothing will get inside the tank or mess up the threads.

V3 is beefed up to be as good as 1 and 2 combined, should never snap on you like 1 might if you rotate with too much friction. Most useful for running a string thru and hanging (like a dead tank windchime).

The reg thread protector is for the bottom threads on the reg once uninstalled (for shipping or storage). Lots of top thread protectors already out there, you won't find another from me.
Update all files updated with slightly smaller threads to reduce friction going into the tank threads. This should cut down on V1 snapped tank plug rings.

I printed this in petg and it fit perfectly. If you print in a different material, check the fit of the thread prior to threading all the way in. If there's a lot of friction, maybe scale down a percent and try again. Just don't break off the plug in your tank or you'll be sad. I printed mine at .2 quality, 80% infil. No supports or adhesion needed.