壁挂夹具
Wall clamp - clamp for organizing
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
If you want to organize your gloves, beanies or anything of that nature, this is the clamp.
If the clamp if not strong enough, I would recommend downloading the fusion file and changing the thickness of the "hinge" and/or the spring.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-5 Plus
- Rafts:Yes
- Supports:No
- Resolution:0.15mm
- Infill:60%
- Filament brand:
N/A
- Filament color:
N/A
- Filament material:
PLA
Post-Printing
Little tedious to get all the brim off.
Took a razor knife and just all the small little brim parts of and a little 400 grid sandpaper for the final touch.
How I Designed This
Trial and error
I have gone through about 9 different prints of this. Either it was too hard to open, too weak to close or cracked.
This design is just a qualified guess at what I think works good
Tags
License
Wall clamp - clamp for organizing
by SebastianTheMaker is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
grip and bta for Vision TFE2024-03-19 -
双重丰富砖2024-03-26 -
Weiner狗卫生纸架2024-04-06 -
CZ455 452 512 弹匣底板2024-04-22 -
ZOHD ALTUS鼻部设计用于Moonlight Kit套装2024-04-22
最热下载
-
车身RC 1/10 全套2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
「春雷」弹壳弹出式泡沫飞镖发射器（进行中）2023-03-26 -
Dado - 立方体模型2024-03-24 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21
最新模型
-
3D 打印遥控刷式喷气推进船（喷气船）2025-09-15 -
丰田22RE发动机Starer电机2025-08-08 -
罗技K400键盘壁挂式支架2025-07-27 -
育苗盆-连续自动浇水系统（符合欧盟标准的密封水瓶）2025-07-25 -
一体打印行星齿轮2025-07-15