Wrenches For Jar-Top Sprinkler Valves - Hunter and Irritrol

2023-08-06 23:50:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Wrenches For Jar-Top Sprinkler Valves - Hunter and Irritrol

Summary

These are wrenches for Hunter and Irritrol jar top sprinkler valves.

Sometimes sprinkler system valves are installed in underground boxes with little room to work. Getting tools on the jar tops to loosen/tighten can be a problem. I recently had to use a large set of channel locks to work on a valve, but it wasn't easy because of limited space. I could find no such specialized tools to help so I made these wrenches after the fact.

These wrenches have been fit tested but not stress tested because I already fixed my valve. PLA and 15% infill seems good enough because once in place the jar top itself provides a lot of support to the tool, but I'm not ruling out the need to make the tool beefier.

I have used Thingiverse for a long time and I am happy that I can finally contribute something.