ESP32-C3-DevKitC-02扩展版

ESP32-C3-DevKitC-02-extender for IKEA Smahagel with micro USB port

2023-08-07 00:17:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a combination and remix of two things. I remixed the D1 mini case to support an ESP32-C3-DevKitC-02 card with miniholes for the pins to hold the card in place. The hole-part I borrowed from ESP32 Cam housing and modified to fit my needs.

The pinholes are exactly large enough to mount a cable with metallic holders.

Print Settings

Printer brand:
AnkerMake
Printer:
AnkerMake M5
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0,1
Infill:
10%
Filament brand:
Dosen't matter
Filament color:
White
Filament material:
PLA
Notes:
I printed this at a high resolution since i wanted as little post processing as possible, I am a bit lazy that way. It is fully printable without supports if you flip the design and place the "roof" and the "bottom" on the printertable. I did not do this since my table creates a very rough surface and I wanted this to be smooth. It is also printable at 0,2 resolution but of course it gets a bit fuzzier on the details then.