VORON2摄像头架:ESP-32-CAM / ESP-32-MB配备超广角镜头
ESP-32-CAM / ESP-32-MB / Wide Angle lens, camera mount for VORON2
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
Mount for a ESP-32-CAM with ESP-32-MB board and wide angle lens.
This was initially designed for VORON2 printers, but it might find a place in other printers too.
I have a toolcam and a print surface cam, both showing a nice view on the print at hand. For these cams I used cheap Logitech C27 webcams for which you can find mounts over here: Logitech C270 cam mounts
But I also would like to have a cam that observes the whole of the printer mechanism. For that purpose I used a ESP32 cam- and mainboard combined with a wide angle camera especially made for the ESP-32 CAM board.
I designed a mount for this cam that would observe the printing from a birds-eye view.
Here you can find the boards and wide angle camera I used:
Pls see this site or this sitefor more information on configuring the ESP boards combination.
I added a comprehensive building guide.
As said, I designed it for my VORON2 printer, but it can also be used for other printers.
Tags
License
ESP-32-CAM / ESP-32-MB / Wide Angle lens, camera mount for VORON2
by tvthiel is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license.
相关内容
猜你喜欢
联系我们
热门推荐
-
Tigger [维尼熊猫] 3D模型2023-03-27
-
MikroTik mAP 2nD 定制案例2023-05-11
-
Peugeot 2008 iPhone Magsafe Holder2023-06-19
-
索尼爱博 ERS-210/220机器人狗 18650替用电池盒2024-01-14
-
Wifi Trax-WFD 30 外壳2024-01-16
最热下载
-
Makergear M3 M2喷嘴标签2024-03-27
-
Articulated Snake2024-03-30
-
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14
-
幻想磁力2024-05-03
-
沙丘巡游者2024-05-03
最新模型
-
私密羞羞娱乐骰子2025-07-15
-
唇膏/润唇膏盒带卡片插槽2024-05-08
-
男法术师2024-05-08
-
漂浮式水耕模型2024-05-06
-
Jenga盒子2024-05-06