懒散的蓝色光盘传感器适配器（Stealthburner Voron）

Lazy BD-SENSOR adapter For Stealthburner Voron

2024-04-04 11:30:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

By lazy, it means that you do not need to reprint any existing parts of the CW2 or Stealthburner. This is a plug-and-play mount for the BD bed levelling sensor that integrates with an existing CW2 setup.

It weighs ~4.3g and by placing the PCB behind the CW2, airflow through the hotend is improved over the inductive probe setup.

Minimal supports needed and are detailed in the attached images (green)

NB The PCB is secured by compressive force as the block is drawn into the CW2 socket. Double/Triple check tolerances so that this force is just enough to secure the body and not enough to damage the device. STEP files attached if adjustments are needed. I've installed this on two printers with Stealthburners (Voron 2.4 and modified CR-10) and the tolerances were perfect. However this is dependant on the accuracy of your CW2 rail mount and adapter.

Still a work-in-progress