K1型号导线传感器适配器

Filament sensor adapter for the K1

2024-01-07 06:06:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I know that there is tons of filament sensor adapters for the K1 but all has the same issue that it's that the filament gets bended between the adapter and the filament sensor. So you need to unscrew it, take out a small amount of filament and put inside the adapter in order to reach the extruder.

My version is improve to force the filament go straight (as possible) to get inside the extruder to print anything.

You only need a M5 insert and M5 bowden coupler. Reuse the M3 screws from the machine.

Requires PETG/ABS in order not to melt the plastic with the soldering iron. You can print it with PLA but If you use the soldering iron, it will probably get melted.

No supports need it.

Print Settings

Printer brand:
Creality
Printer:
K1
Rafts:
No
Resolution:
N/A
Infill:
5
Filament brand:
N/A
Filament color:
Black
Filament material:
PETG

Post-Printing

Tags

adapter Creality

License

CC BY

Filament sensor adapter for the K1
by gepigom2883 is licensed under the Creative Commons - Attribution license.

K1型号导线传感器适配器

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

MisteR MIDI流处理台 - 基于Arduino设计
2023-03-26
卡通人物 Bugs Bunny 站立
2023-05-25
Gridfinity 花瓶款式容器
2024-01-14
原型Kongu Inika面具 | 以Noble Ruru为基础
2024-03-31
37毫米防御炮 18/36/37型
2024-03-31

最热下载

最新模型