AI刀片末端支架（带螺丝）

AI Blade End Mount with Screws

2023-08-07 02:04:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is my first thing! In fact I made this account so I could upload this because I couldn't find one. This is an end mount for the AI Blade lights with an 8MM screw to fit into the end of the lights. The mounts can face either direction, and this includes relief for the cord to come straight out. The hex part is setup for a M4 nut, but you can also use a countersunk wood screw in there and it still looks good.

I just printed them flat on the table, no support, I used PLA with stock settings in Ultimaker Cura, but I've included the screws as a sperate file as well because I made the walls much thicker on them so I could give them more torque.

If you improve this design be sure to add a link here! I'd love to see improvements and maybe upgrade myself.