模块化油漆架 - 背部带凸起

Modular Paint Rack - back with lip

2023-08-07 03:24:51

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Remixed from the original design for my needs.

Added a lip to the 6-bottle back to prevent bottles slipping down when stored nozzle outwards.
Added a smaller lip to the front rack to make it a bit stronger, less flexible.
Also includes a clip that can be glued to the sides to facilitate stacking the racks.

Paint_Rack_5_bottle_back.stl - 5 bottle wide rack
Paint_Rack_5_bottle_front.stl - 5 bottle wide rack
Paint_Rack_back.stl - standard flat back panel
Paint_Rack_back_lip.stl - back panel with small lip at bottom
Paint_Rack_back_lip_7mm.stl - back panel with large lip at bottom
Paint_rack_clip.stl - clip for stacking the racks - need 1 per upright section
Paint_Rack_front.stl - standard flat front panel
Paint_Rack_front_lip.stl - front panel with small lip for reinforcement
Paint_Rack_Side.stl - 5 row side panel
paint_stand_2_row.stl - 2 row side panel
paint_stand_3_row.stl - 3 row side panel
paint_stand_4_row.stl - 4 row side panel

To build, choose the height of side panel required. Print 2 end panels, plus 1 end panel per extra section (in my picture I have 3 sections, so 2 end panels plus 2 for the middle panels)
Print as many front and back racks as required for your setup.
If stacking, print 1 clip per upright panel.

Use CA glue (superglue) to glue racks into side panels. The ends of the racks will fit in to both sides of the panel, so no need to mirror, and only need one upright panel between sections.