3dsjs

Volvo C40 XC40手机支架

Volvo C40 XC40 Phone Dock

2023-08-07 04:06:13

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

This design was inspired by Holraven's design.

This dock sits in that weird little ashtray cubby between the wireless charger and the shifter.

The goal of the redesign:

  • No need to drill/alter/remove anything in the car.
  • Allow the phone to be easily docked (at a viewable angle) and easily removed.
  • Allow easy removal of the dock, to allow the ashtray cover to close.

This dock can be used with an iPhone or Android as the cable is available in both Lightning and USB-C.

Bill of Materials

Assembly

  • Slide the cable into the cylinder opening and push it until it reaches the end.
  • Cut pieces of non-slip pad and apply them to:
    • The front and back of the outside bottom of the dock. This will make it a snug fit in the ashtray opening, locking the dock into place.
    • The inside of the dock, front and back, to help the phone stay in place when docked.

Notes

  • This was designed around my current iPhone 11 pro with a thin case on it. So a thicker case may make it a tight fit. The cable's plug is centered in the dock (front-to-back), with a depth of 13.3mm, without non-slip padding.

Tags

License

CC BY-NC

Volvo C40 XC40 Phone Dock
by jasonatepaint is licensed under the Creative Commons - Attribution - Non-Commercial license.

Volvo C40 XC40手机支架
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢