Volvo C30/S40/V50系列自动变速器滑动部件3D模型
Volvo C30/S40/V50 Automatic shifter slide
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Magnet must be NORTH UP
Cavity for magnet: 4.5mm wide, 3.3mm high, 8.2mm long (I think this is the original one with some tolerance)
0.8mm pins to lock top of block in, I drilled out the holes after printing and used mig wire to pin it and glued together after.
You may need to file the hole if it doesn't slide right
Print Settings
- Printer brand:
Kingroon
- Printer:
Kingroon KP3S
- Rafts:Doesn't Matter
- Supports:Doesn't Matter
- Resolution:0.2
- Filament brand:
eSun
- Filament material:
PETG
- Notes:
Base has slides to allow it to... slide easier.
Post-Printing
May need to drill out holes, angle should be enough to hold it. Also use glue if you really want to be sure.
Tags
License
Volvo C30/S40/V50 Automatic shifter slide
by Catimus is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
商务卡持有器2024-03-18 -
望远镜等臂架反重量2024-04-01 -
Opel Zafira B 后退档锁 3D模型2024-04-02 -
Logitech G604鼠标扫描数据与橡胶替换2024-04-08 -
牙膏、牙刷和舌刷夹持器2024-04-23
最热下载
-
SpaceX星舰S20/B4 3D模型2025-07-15 -
Quansheng UVK6 桌面支架2024-01-10 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
Enders 3版控制面板2024-05-08
