Kenmore 滑动折叠架子支撑条

Kenmore Slide-Away Shelf Retainer

2023-08-07 05:40:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a retainer that keeps my fridge shelf from accidentally sliding in.

My Kenmore fridge has a "Slide Away" shelf that lets you stow away the front half of the shelf under its back half to make space to place something tall on the shelf below it. Often the shelf gets bumped and starts to slide while there's still stuff on the front half.

This clip keeps the shelf locked in place by holding the panes of glass at the same height. To install, slip the clip through the gap between the front and back halves and rotate 90 degrees to engage the clip onto the panes.

Mouse ears included for bed adhesion. No brim needed.

Print Settings

Printer brand:
Creality
Printer:
CR-6 SE
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
100
Filament brand:
Doesn't matter
Filament material:
PLA
Notes:
Raft/brim not needed, includes "mouse ears" that hold the thin parts of the part onto the bed. Mouse ears are easy to remove and clean up.