3D打印材料存储盒（干燥盒套装）

3,4l MultiBox filament storage accesories (drybox kit)

2023-08-07 19:46:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Additional accessory kit for the 3.4 litre "MultiBox" food container manufactured in Turkey (ean CODE 8694064003156). The kit makes it easy to store the filament in dry conditions, and to use it without taking it out of the box.

The kit includes:

-desiccant container - which also acts as a slide for the spool,

-grommet for PTFE tube,

-mounting ring for hygrometer,

-additional cover snap clip (helps seal the container after gasket installation)

-optional tip for PTFE tube.

Print with whatever material you want, just don't use PLA for the heated chamber.

Select the preferred nozzle. Please be aware that the desiccant container is available in three versions designated for different nozzles. This can potentially save both time and material.

Spool insert cap - print with a wall thickness of at least 1.5mm without top and bottom surfaces with 40% grid infill. Or as you like :)

You may also find it useful:

-7pcs of M3x12 screws

-M3 tapping drill (helps you screw the PTFE grommet and hygrometer ring) or a regular 2.5mm one

-3.5mm drill (mounting holes)

-8mm drill (hole for PTFE tube)

-4mm drill (to correct the PTFE grommet hole)

-4/2mm scrap of PTFE tube or a long tube if you need one (the Capricorn tube and others with an outer diameter of 3.9 - 3.95mm have not been tested by me).

-A self-adhesive polyurethane foam window seal or a "D" type EPDM seal - or simply one that fits and is easily accessible.