叶子捕捉器 - 加固版
Leaf Catcher - reinforced
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I had some trouble printing out the original model at a smaller size (65mm vs 80mm. Model is 80mm) using a flexible PETG. The ribs became very thin and were very flexible so accuracy was bad.
The ribs are now reinforced with triangular connectors which can be cut away (use flush cutter) if more flexibility is needed.
Sliced it in Cura using the experimental "make overhangs printable" feature on and added 0.3mm XY compensation to make the ribs a bit thicker.
Printed 2x 0.6mm walls and 0% infill and without supports
Tags
License
Leaf Catcher - reinforced
by JW693d is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
Nautilus 608 3D模型设计2023-03-27 -
垃圾捡拾RC船模型2023-05-03 -
M8连杆式变速器手柄（用于模拟变速器）2023-05-12 -
Apex HD M8 Mini GPS Module Mount TPU2024-01-15 -
汤姆森GO5200进入空气导管2024-03-25
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
可定制像素珠子照片面板2023-03-26 -
GPD Win3 把手型号2023-04-07 -
Metabo SXE450 真空连接器（适用于Bosch Advanced VAC20）2024-01-11 -
GTA 5 大地图模型2024-04-21
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
戴森V6真空吸尘器配件壁挂支架2025-07-17 -
高跟鞋鞋架2025-07-17 -
天使和恶魔2025-07-16 -
一体打印行星齿轮2025-07-15