Resmed Airmini和Medistrom Lite电池的产品案例

Case for Resmed Airmini and Medistrom Lite Battery

2023-08-08 06:03:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

You can just glue the official wall mount to the battery using strong double sided tape (such as 3M VHB)

But if you have lost the wall mount or already using it somewhere else, here's a frame for the Medistrom Lite Battery with the same mount to go with the OEM Resmed Airmini Mounting System

If you dont have the OEM Resmed Mount Ecosystem at all, you can print the Generic Versions.

The battery just slides and clicks into place.

Optional : you can stick 8mm rubber feet underneath for better grip of the whole stack on a table

Print Settings

Printer:
FDM + Resin Preferred for the OEM Mount
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
30%
Notes:
Everything can be made by FDM.
Resin Printing is preferable for the Small Mount.

Both Parts are separate to avoid excessive support material.
You can just glue the mount socket in place.