推动杆锁和螺钉固定点
Tiller Clutch, Tiller Lock. Pinne Arretierung
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This are tiller Locks for use on a (single handed) sailboat when you need rigging sails or attend to a fouled sail or whatever you have to do. Engage the lock and this will keep the tiller from wandering uncontrolled.
I designed both myself. One is a simple version and the other has a clamp mecanism. Choose what you need!
Designed to work with a 6mm rubber line.
Use the simple one as printed.
On the other one, after printing, you have to heat up the clamp plate on the thinner part with hot air 200 degC and bend it as shown.
Both where testet on an 15ft sailboat an on an Hobbykat catamaran.
The screw on the lever is M4, use a self locking nut. On the bases use 3.5mm screws.
You can also find adapters for round tinner, 34mm diameter.
Printed with 90% infill in ASA-X, with support.
License
Tiller Clutch, Tiller Lock. Pinne Arretierung
by franky99 is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
Aquara壁安装支架2023-04-26 -
带有排气设计的小型漏斗模型2023-08-20 -
WARPED FLOWER2024-03-28 -
山羊/精灵族/魔鬼角 - 可拧上或穿过发丝2024-04-05 -
Hoe缓冲块3D模型2024-04-30
最热下载
-
Nissan S13 Silvia BN 运动装备套件 RC车身 1:10 3件2023-08-23 -
3D模型：Easier Print LTT螺丝刀拉拔器2024-01-14 -
吸血鬼领主（免费D&D小模型）2025-07-15 -
Woods Mower 30922 护盾保持者2024-04-24 -
基础鸟饲料架2024-04-30
最新模型
-
6米共线相位块结构2024-05-08 -
TF2守卫Mr.Skin 3D模型2024-05-08 -
Tomy赛车驾驶舱部件2024-05-08 -
Delta 36-465桌面圆盘可更换插入物2024-05-08
