舌尖之舞

Slide Shakuhachi Flute

2023-08-08 07:23:47

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Play this new and unique musical instrument - a slide shakuhachi-style flute! This prototype was designed to fine-tune the length, but it's already close to the traditional 1,8 and can play simple songs. Low notes are still difficult due to air leaks around the inner tube, and this might be difficult to resolve through 3D printing alone. (The plan is to machine the final version from Delrin.) Intended as a fun instrument for kids of all ages to play that develops their sense of pitch like singing.

Print Settings

Printer brand:
Artillery
Printer:
Artillery Sidewinder X1
Resolution:
Standard
Infill:
20%
Filament brand:
MatterHackers
Filament color:
Putple
Filament material:
Tough PLA
Notes:
As these are long, thin tubes, it's more reliable to print in the horizontal orientation, unless you're sure of no z-wobble.

Post-Printing

As this is a protype, there's no post processing on the demo version.

How I Designed This

I conceived the idea and produced a prototype (from a telescoping mop handle) about twenty years ago, when I was learning shakuhachi. The next prototype was a modified pBuzz from pPlayMusic (http://www.pplaymusic.us/pInstruments.html), which is highly recommended. Finally, OpenAi's ChatGPT helped me to develop the idea by discussing acoustics. supporting me in using Fusion 360 and Cura, as well as in ascending the steep 3D printing learning curve.